ADJ Saber Spot RGBW

Compact LED Pinspot with Razor-Sharp Pin-Spot Beam

The ADJ Saber Spot RGBW is a compact LED pinspot running a single 15W 4-in-1 RGBW quad LED through a built-in ACL lens that produces a 4° beam — tight enough for mirror balls, wedding tables and small-stage truss highlights. Color mixing across red, green, blue and white runs smooth, and 64 color macros deliver ready-made looks without a console. The result is a fixture that hides easily inside rigging yet still cuts a defined, edges-clean circle of light across the floor.

What Makes This Model Different

Most pinspots at this price tier lock you into one fixed beam angle, forcing busy operators to stock different fixtures for different jobs. This unit ships with two interchangeable frost filter lenses — 10° and 45° — that snap into the front of the housing, letting a single fixture act as a narrow mirror-ball illuminator, a centerpiece spot or a wider accent wash. Flicker-free output, RDM (Remote Device Management) compatibility and a 3.6 kHz LED refresh rate make the fixture equally usable on camera as on stage.

Light Source, Control and Physical Build

A single 15W 4-in-1 RGBW quad source rated for 10,000 hours pairs with the ACL lens and the included frost filters. Eleven DMX channel modes (3, 4, 4, 5, 6, 6, 7, 8, 8, 9, 11 and 12 channels) sit alongside master/slave and static color operation, all navigated through a 4-button LCD display on the rear panel.

• Light Source: 15 W 4-in-1 RGBW quad LED with a 10,000-hour rated life and 3.6 kHz flicker-free refresh rate.
• Beam Angles: 4° native ACL beam, plus snap-on 10° and 45° frost filter lenses included in the box.
• Color and Dimming: 64 built-in color macros, smooth RGBW mixing, and 0–100% electronic dimming plus strobe.
• DMX and Power: 11 channel modes with RDM, locking PowerCon input/output for daisy-chains, 3-pin XLR DMX pigtails.
• Hands-on mounting stays straightforward: the 1.2 kg body sits on the included scissor yoke for floor, T-bar or truss placement without extra adapters, while the 88 x 170 x 87 mm metal black housing keeps the footprint tight inside rigging.

Who This Pinspot Suits

The Saber Spot RGBW is the right choice for mobile DJs, wedding lighting operators and small-stage installers who need one compact fixture to cover spotlight, accent wash and mirror-ball duties. Locking PowerCon input and output simplify daisy-chained power runs, while 3-pin XLR DMX pigtails save space on a crowded T-bar. A maximum 14 W draw per fixture means several units can share a single circuit, and the supplied frost filters let each lamp reconfigure between gigs without pulling it from the truss.