Albānija
Amerikas Savienotās Valstis
Argentīna
Austrija
Austrālija
Beļģija
Bosnija un Hercegovina
Brazīlija
Bulgārija
Dienvidāfrika
Dānija
Filipīnas
France
Grieķija
Horvātija
Igaunija
Itālija
Jaunzēlande
Kanāda
Kolumbija
Latvija
Lielbritānija
Lietuva
Luksemburga
Meksika
Melnkalne
Moldova
Norvēģija
Nīderlande
Polija
Portugāle
Rumānija
Serbija
Slovākija
Slovēnija
Somija
Spānija
Turcija
Ukraina
Ungārija
Vācija
Ziemeļmaķedonija
Zviedrija
Čehija
Čīle
Īrija
Šveice
Eurolite Superstrobe 2700 DMX
The Eurolite DMX Superstrobe 2700 is a high-power xenon strobe built for stages, clubs, dance schools and rental fleets, drawing 1500 W from a pre-installed flash tube. Two DMX channels tune intensity (0–100 %) and flash rate (1–12 per second), with a stand-alone mode for simpler rigs. The wide reflector fills a room from one rig point while passive convection cooling keeps noise to a Class 1 minimum.
- Pre-installed 1500 W xenon flash tube plus colour filter frame for tinted washes.
- Wide-angle reflector covers a large dance floor from one or two units.
- 2-channel DMX plus stand-alone control fits any lighting desk or bare-bones rig.
- Passive convection cooling with a Class 1 noise rating for theatres and small venues.
1500 W DMX strobe for clubs, stages and rental fleets
The Eurolite DMX Superstrobe 2700 fires cold-white xenon pulses from a fitted 1500 W flash tube, with a wide reflector that fills a dance floor from a single rig point. Two DMX channels patch from a lighting desk — channel 1 for intensity (0–100 %), channel 2 for flash rate (1–12 per second) — while rear-panel controls handle stand-alone use without a controller.
What separates this strobe from budget club units
Where entry-level strobes ship with bare lamp housings, this model arrives with the flash tube pre-installed and a colour filter frame mounted in front of the reflector, so tinted gels drop in without modification. Silent passive convection cooling earns a Class 1 noise rating suitable for theatres.
Flash output parameters
Flash tube output and power supply ratings determine how hard the strobe hits and how fast it pulses — the parameters operators feel during a live show.
- Power Consumption: 1500 W — drives cold-white pulses through club ambient light.
- Flash Rate: 1–12 flashes per second — covers slow dramatic pulses to fast chase chains.
- The electronic dimmer sweeps the full 0–100 % intensity range, with control from DMX channel 1 or the rear panel when a fast on-the-fly tweak is what the show needs.
DMX connectivity and control
Two channels and standard 3-pin XLR connectors make patching the strobe into an existing rig straightforward.
- DMX Channels: 2 — channel 1 intensity, channel 2 flash rate.
- DMX Connectors: 3-pin XLR (M) input, 3-pin XLR (F) output for daisy-chasing multiple strobes in chase effects.
- Pair the strobe with stand-alone presets, a DMX console, Eurosoft LED PC-Control 512 or the Light Captain app — every tier of operator finds a familiar workflow without adapters.
Mechanical build and installation
The compact metal chassis and included mounting bracket suit both touring rigs and permanent installs.
- Dimensions: 460 x 240 x 140 mm — flat profile slides onto T-bar stands and truss.
- Weight: 3.11 kg
- Housing & Cooling: 1.5 mm black matte metal, passive convection cooling
- An attached Approx. 1 m H05VV-F cable carries 230 V AC at 50 Hz directly from the wall — no external transformer needed on touring rigs.
Power Supply
240V
UK/EU Power supply included
Weight
3,05 kg
Made in
China
Visas atsauksmes ir no pārbaudītiem klientiem, kuri iepriekš ir iegādājušies mūsu produktus.
Dokumenti
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
