Albānija
Amerikas Savienotās Valstis
Argentīna
Austrija
Austrālija
Beļģija
Bosnija un Hercegovina
Brazīlija
Bulgārija
Dienvidāfrika
Dānija
Filipīnas
France
Grieķija
Horvātija
Igaunija
Itālija
Jaunzēlande
Kanāda
Kolumbija
Latvija
Lielbritānija
Lietuva
Luksemburga
Meksika
Melnkalne
Moldova
Norvēģija
Nīderlande
Polija
Portugāle
Rumānija
Serbija
Slovākija
Slovēnija
Somija
Spānija
Turcija
Ukraina
Ungārija
Vācija
Ziemeļmaķedonija
Zviedrija
Čehija
Čīle
Īrija
Šveice
Fluid Audio FC10S
The Fluid Audio FC10S is a 10-inch powered studio subwoofer designed to extend the low-frequency response of nearfield monitors down to 20 Hz. Built around a 200 W Class-D amplifier and a composite paper woofer, it adds accurate, room-filling bass to project studios, home theaters, and gaming setups. The included bypass footswitch lets engineers A/B mixes with and without subwoofer support in real time.
- 10" composite paper cone with high-temperature voice coil and damped rubber surround for tight, controlled low end
- Variable low-pass crossover (50–200 Hz), variable phase (0–180°), and 80 Hz high-pass filter for clean integration with main monitors
- Switchable Flat and Punchy voicing modes to handle both reference monitoring and bass-heavy music production
- XLR, 1/4" TRS, and RCA inputs plus XLR and 1/4" outputs for flexible studio and home-entertainment wiring
Fluid Audio FC10S — 10" Powered Studio Subwoofer for Accurate Bass Extension
Engineered to deliver bass extension down to 20 Hz for mid-to-large rooms, this active 10-inch studio subwoofer pairs a 200 W Class-D amplifier with a single 10" composite paper cone. The result is the low-frequency foundation that nearfield monitors alone cannot reproduce. The FC10S is the right choice for recording and mixing engineers, producers, and gamers who need to hear — and feel — the full bottom end of their audio.
Bypass Footswitch, Angled Port, and Switchable Voicing
This model ships with a hardware bypass footswitch that mutes the sub on demand, so engineers can A/B a mix with and without bass extension in real time. A front-baffle bass-reflex port with an angled slot design combines direct-radiating output with floor loading for stronger low-end reach. A switchable Flat/Punchy voicing mode adds an 80 Hz, 5 dB boost for dance and bass-heavy material.
10" Composite Paper Woofer and Class-D Power
The driver and amplifier pairing defines how cleanly this sub reproduces low frequencies at monitoring levels.
- LF Driver: 10" composite paper cone with high-temperature voice coil and damped rubber surround
- Amplifier Power: 200 W Class-D with switching power supply for efficient, cool-running operation
- Max SPL: 100 dBA at one meter — adequate headroom for project and mid-sized rooms
Variable Crossover, Phase, and High-Pass Filter
Integration with main monitors depends on flexible crossover and phase controls.
- Frequency Range: 20 Hz – 200 Hz
- Variable Low-Pass Filter: 50 Hz – 200 Hz
- Variable Phase: 0°–180° (12-position switch)
- 80 Hz High-Pass Filter on satellite outputs, engaged via footswitch
Balanced I/O, Ground Lift, and MDF Cabinet
Wiring flexibility and solid enclosure construction matter when a sub sits under a desk or in a corner.
- Inputs: 2x XLR balanced, 2x 1/4" TRS balanced/unbalanced, 1x stereo RCA unbalanced
- Outputs: 2x XLR balanced, 2x 1/4" TRS balanced/unbalanced for full-range monitors
- Ground Lift Switch eliminates hum caused by problematic AC wiring
- Cabinet: Vinyl-laminated MDF with protective metal grille — 387 x 317 x 394 mm, 10.2 kg
Tips
Woofer
Tweeter
Power (Watt)
Frequency Range
Crossover Frequency
Sound Pressure Level (SPL)
Package Contents
Footswitch
Power Supply
240V
Width (cm)
38,7
Height (cm)
31,7
Depth (cm)
39,4
Weight
10,2 kg
Made in
China
Dokumenti
Ražotāja informācija
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
