Fractal Lights LED 18 x 10 W IP65 LED PAR
Zīmols: Fractal Lights
Produkta kods: 337672
Zīmols: Fractal Lights
Produkta kods: 337672
Fractal Lights LED 18 x 10 W IP65 LED PAR
The Fractal Lights PAR LED 18x10W IP65 is a weatherproof RGBW LED PAR fixture built for permanent outdoor and indoor installations. Eighteen 10-watt 4-in-1 LEDs deliver a wide color palette with clean white tones, while the IP65-rated sealed housing protects against rain, dust, and snow. DMX512 control with seven channels, plus Auto, Master-Slave, and sound-active modes, makes it flexible for both programmed shows and plug-and-play setups.
- 18 × 10W 4-in-1 RGBW LEDs for full-spectrum color mixing with dedicated white channel
- IP65-rated sealed enclosure withstands rain, dust, and snow for permanent outdoor mounting
- DMX512 with 7 channels, plus Auto, Master-Slave, and sound-active operating modes
- Smooth 0–100% dimming, XLR DMX in/out, and 25° beam angle for focused wash coverage
Weatherproof RGBW LED PAR for Outdoor and Indoor Installations
The Fractal Lights PAR LED 18x10W IP65 is a professional LED PAR fixture built for reliable color washing in any weather. Eighteen 10-watt 4-in-1 RGBW LEDs deliver saturated colors plus clean white tones for facades, stage washes, and event uplighting. The IP65-rated sealed housing protects against rain, dust, and snow for year-round outdoor mounting.
Built for Outdoor Duty with Flexible DMX Control
The fully sealed IP65 enclosure with sealed connectors allows continuous outdoor operation in demanding conditions. The 4-in-1 RGBW LED configuration adds a dedicated white chip alongside red, green, and blue, producing cleaner pastels and true white output that standard RGB fixtures cannot match. Sound-active mode and Master-Slave linking let smaller setups run without a dedicated lighting desk.
Light Source and Color Mixing
The 4-in-1 LED engine combines red, green, blue, and white diodes in each emitter for a wider tonal range than RGB-only PARs. The dedicated white channel delivers neutral whites for key lighting, while combined RGB channels produce deep saturated colors for stage and architectural use.
- LED Configuration: 18 × 10W 4-in-1 RGBW — full-spectrum mixing with a dedicated white channel
- Beam Angle: 25° — focused wash for stage and facade lighting
- Dimming: smooth 0–100% — precise intensity control without stepping
DMX Control and Operating Modes
DMX512 with seven channels slots into any standard lighting console, while Auto, Master-Slave, and sound-active modes provide plug-and-play operation for mobile DJs and smaller rigs. XLR DMX in and out connectors support daisy-chaining multiple units on a single cable run.
- DMX Channels: 7 — compact footprint for straightforward programming
- DMX Standard: DMX512 — universal compatibility with professional desks
- Operating Modes: DMX512, Auto, Master-Slave, sound-active — adapts to any setup size
- DMX Connectors: XLR in / XLR out — daisy-chain multiple fixtures
Power, Durability, and Outdoor-Ready Construction
The IP65-rated housing and sealed connectors suit permanent outdoor installations in hotels, theaters, clubs, and event venues, with an LED lifespan of 60,000 to 100,000 hours minimizing maintenance over years of continuous service.
- IP Rating: IP65 — dust-tight and protected against water jets
- Power Consumption: 200W — moderate draw for an 18-LED professional PAR
- Power Supply: 220–240V, 50–60Hz — standard European mains
- LED Lifespan: 60,000–100,000 hours — long service life for permanent installs
Dokumenti
Lietošanas instrukcija
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
