Albānija
Amerikas Savienotās Valstis
Argentīna
Austrija
Austrālija
Beļģija
Bosnija un Hercegovina
Brazīlija
Bulgārija
Dienvidāfrika
Dānija
Filipīnas
France
Grieķija
Horvātija
Igaunija
Itālija
Jaunzēlande
Kanāda
Kolumbija
Latvija
Lielbritānija
Lietuva
Luksemburga
Meksika
Melnkalne
Moldova
Norvēģija
Nīderlande
Polija
Portugāle
Rumānija
Serbija
Slovākija
Slovēnija
Somija
Spānija
Turcija
Ukraina
Ungārija
Vācija
Ziemeļmaķedonija
Zviedrija
Čehija
Čīle
Īrija
Šveice
Pērc šo produktu nocenotā komplektā
Line6 HX Stomp Ģitāras multiefekts
Line 6 HX Stomp is a compact amp and effects processor that packs over 300 Helix-family amps, cabs, and effects into a chassis barely larger than a standard guitar pedal. Running up to six processing blocks simultaneously, it also doubles as a 24-bit/96kHz USB audio interface for direct recording.
- Over 300 amps, cabs, and effects from the Helix, M-Series, and legacy Line 6 catalogs
- Three capacitive-touch footswitches with color-coded LED rings
- SHARC audio engine with component and behavioral modeling for authentic analog response
- Features MIDI In/Out, dual effects loops, expression pedal support, and a USB audio interface for direct recording.
Line 6 HX Stomp — Helix Power in a Stompbox
Line 6 HX Stomp delivers the full Helix modeling engine in a chassis barely larger than a standard guitar pedal. It packs over 300 amps, cabs, and effects from the Helix, M-Series, and legacy Line 6 catalogs, running up to six processing blocks at once. The unit works as a super stompbox, backup rig, tone expander, USB audio interface, or full guitar or bass rig.
What Sets the HX Stomp Apart
Built around a SHARC audio engine, the processor combines component modeling — measuring each amp stage — with behavioral modeling that captures analog behavior like germanium fuzz and bucket-brigade delay. Three capacitive-touch footswitches with color-coded LED rings and Snapshots give players instant, dropout-free access to multiple preset variations.
Connections and Signal Routing
MIDI In and MIDI Out/Thru jacks turn the unit into a rig command center, sending Program Change and Continuous Controller messages. Standard 6.3 mm TS jack inputs and outputs handle instrument-level connections.
- Inputs: MIDI IN, 6.3 mm TS jack — mono or stereo
- Outputs: MIDI OUT, 6.3 mm TS jack — unbalanced TS or balanced TRS
- MIDI Interface: Yes — full In/Out/Thru plus USB MIDI
- Two effects loops with 1/4" TRS provide flexible ways to patch external pedals into any preset.
Processing Power and Recording
The SHARC-powered DSP delivers 123 dB of dynamic range and doubles as a multi-channel USB audio interface for direct recording.
- Audio Interface: 24-bit/96 kHz USB — record into a DAW
- Dynamic Range: 123 dB — ultra-low noise
- Cabinet Models: 2048-point IR equivalent — third-party IR support
- Power is supplied by the included DC-3 adapter, as this unit does not support batteries.
Onboard Controls and Layout
Three capacitive-touch footswitches, parameter knobs, and a master volume knob give hands-on access to every parameter without menu diving.
- Controls: Master Volume, Footswitch, Parameter Knob, Control
- Display: 2.4-inch (6 cm) color LCD
- Footswitches: 3 capacitive-touch with LED rings
- Included in the box is a DC-3 adapter, manual, and cable.
Tips
Number of Effects
Number of Buttons
MIDI Interface
Inputs
Outputs
USB
UK/EU Power supply included
Made in
China
Iegādājies Line6 HX Stomp Ģitāras multiefekts nocenotu komplektu.
KOMPLEKTS ar nocenotiem piederumiem. Piederumi un palīgmateriāli agrāk vai vēlāk būs nepieciešami. Iegādājies tos tagad un ietaupi sev naudu un laiku. Vēlāk ar to nebūs jātiek galā. Turklāt tu vari būt pārliecināts, ka komplektā esošie piederumi būs piemēroti tavam produktam.
Pieejamie komplekti:
Visas atsauksmes ir no pārbaudītiem klientiem, kuri iepriekš ir iegādājušies mūsu produktus.
Atsauksmju AI kopsavilkums
Pamatojoties uz atsauksmju skaitu: 35
Stiprās puses
- Sound Quality: Customers consistently praise the device for its perfect, noise-free sound, high-quality effects, and the ability to produce excellent tones for various instruments.
- Compact and Portable: Many users highlight its small, compact, and lightweight design, which makes it easy to integrate into pedalboards or use as a standalone solution for musicians on the go.
- Versatility and Flexibility: The processor offers extensive possibilities, including stereo processing, FX loop, and the ability to connect multiple instruments, making it highly adaptable for different setups and musical styles.
- Build Quality: Reviewers frequently mention the device's robust and high-quality construction, including a massive metal casing and durable buttons, ensuring its longevity.
- Intuitive Control: Users find the controls intuitive and easy to use, allowing for effective sound shaping and preset creation, though some initial setup time may be required.
Vājās puses
- Limited Effect Blocks: Some users note the limitation of processing only up to six effects simultaneously, which can be restrictive for complex signal chains, though updates are expected to increase this.
- User Interface: One customer found the user interface and experience to be truly awful, suggesting it's only really usable with computer software.
Ko klienti atkārto
Spriedums
Dokumenti
Lietošanas instrukcija
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
