Mackie PROFX12 V3

Mackie ProFX12v3 Analog Mixer — Studio-Quality Sound for Stage and Recording

The Mackie ProFX12v3 is a 12-channel professional analog mixer with built-in USB that gives recording artists, live performers, and content creators a new level of studio-quality performance. Designed around seven award-winning Onyx microphone preamps and a versatile GigFX effects engine, this desk delivers high-resolution audio with sample rates up to 192 kHz over USB. It is well suited for live sound, home recording, podcasting, and streaming, packing features normally found in larger consoles into a portable 3.6 kg chassis. To top it off, the manufacturer includes the Waveform OEM DAW bundle so the unit doubles as a complete recording rig straight out of the box.

What Sets the Mixer Apart in the Compact Analog Category

What makes this model stand out is the combination of seven Onyx preamps — each delivering up to 60 dB of ultra-low-noise gain — with a dedicated 2x4 USB audio interface running at 24-bit/192 kHz. The GigFX engine ships with 24 customizable effects, including reverbs, delays, choruses, and a Delay+Reverb preset that mirrors the slap-delay-plus-vocal-reverb workflow used by engineers on larger digital consoles. A latency-free direct monitoring path with a dedicated blend knob lets performers balance their live input against DAW playback without timing drift.

Onyx Preamps and Channel Architecture — Capture Every Source

Channel architecture matters because the preamp sets the ceiling for every signal that follows. Seven Onyx mic preamps provide transparent, analog-warmth capture with 60 dB of headroom, while channels 1–2 add switchable Hi-Z inputs for direct guitar and bass connection without a DI box.

\n
• Seven Onyx preamps provide up to 60 dB of gain for clean, low-noise capture of vocals, drums, and acoustic sources.
\n
• Gain Range: -20 dB to +60 dB — wide enough for quiet speech and loud stage sources
\n
• Single-Knob Compression: channels 1–4 — tames peaks on lead vocals and instruments without a rack unit
\n
• Hi-Z Switch: channels 1–2 — plug a guitar or bass straight in
\n

EQ, Effects, and USB Recording — Shape and Capture Your Sound

Every channel ships with the same tonal toolkit, so engineers don't have to relearn the workflow when moving between inputs. The 3-band EQ with hard-bypass switch, 100 Hz low-cut filter, and 48 V phantom power on all mic channels gives consistent results across the entire desk.

\n
• EQ: 3-band, ±15 dB at 80 Hz / 2.5 kHz / 12 kHz — surgical control over low, mid, and high frequencies
\n
• High-Pass Filter: 100 Hz, 18 dB/octave — cleans rumble from stage mics and broadcast sources
\n
• Phantom Power: +48 V on all mic inputs — powers condenser microphones across every channel
\n
• Effects Engine: GigFX with 24 presets — reverbs, delays, choruses, distortion, and Delay+Reverb
\n
• The unit includes 2-in / 4-out USB I/O at 24-bit / 192 kHz for high-resolution recording and playback to Mac or PC.
\n

Build, Connectivity, and Routing — Built for the Road

Live use demands a desk that survives transport and connects to anything in the rack. This model uses a solid steel chassis with tough ABS side protection, an internal universal-voltage power supply, and a comprehensive analog patch bay.

\n
• Dimensions: 8.1 × 33 × 37.5 cm — compact footprint fits a 13" rack shelf or a small stage table
\n
• Weight: 3.6 kg — light enough for one-person load-in
\n
• Main Outputs: 2x XLR balanced + 2x 1/4" TRS — feeds any FOH system or powered speaker pair
\n
• Subgroup & Aux: stereo subgroup bus + mono aux/monitor send — drives a separate monitor mix and a drum sub
\n
• Headphone Output: 1/4" TRS with independent level and blend control — engineer-friendly monitoring
\n

Who the Instrument Is Built For

The unit is the right choice for solo performers, small bands, podcasters, and content creators who need a single desk that handles live mixing, multitrack recording, and streaming without compromise. Solo singer-songwriters gain seven pristine mic preamps, dedicated guitar inputs, and studio-grade effects without hauling a rack of outboard gear. Small bands benefit from the subgroup bus for grouping drums, the aux send for a floor wedge, and the 192 kHz USB path for capturing rehearsals and gigs. Podcasters and streamers get a self-contained rig with zero-latency monitoring, 48 V phantom power for condenser mics, and a 2x4 USB interface that sends separate mixes to headphones and the live channel strip.

Mackie — Built-Like-a-Tank Since 1988

The company has been making music across a wide range of applications since it was founded in Woodinville, Washington in 1988. The ProFXv3 series continues that legacy with the signature Built-Like-a-Tank construction, a steel chassis, and ABS side protection that has earned the brand a reputation for surviving years of road use. Purchasers receive the Waveform OEM DAW and the DAW Essentials Collection of 16 plug-ins, providing a complete production toolkit alongside the hardware.