Stagg HeadBanger 10 LED Moving Head

Compact LED Moving Head Wash with High Output

The Stagg HeadBanger 10 LED Moving Head packs seven 10-watt RGBW 4-in-1 LEDs into a metal housing measuring just 270 × 260 × 230 mm, yet it delivers 6100 lux at one metre — enough to saturate walls, ceilings, and dance floors with vivid color even in medium-sized venues. Operating on the DMX-512 protocol with 9 or 14 selectable channels, the HeadBanger 10 gives lighting operators full command over pan, tilt, color mixing, strobe, and dimmer functions without requiring a massive power budget. At only 80 watts total draw, this fixture consumes a fraction of what older 150-watt discharge lamps demanded, making it a practical choice for mobile DJs running multiple fixtures off limited venue circuits.

RGBW 4-in-1 Color Mixing with Built-In Sound Activation

What stands out in its class is the combination of RGBW 4-in-1 LED chips — each of the seven diodes contains independent red, green, blue, and white emitters — and a built-in microphone for sound-active mode. Unlock pastel tones and warmer color temperatures with the white channel, while sound-active function with adjustable sensitivity enables operation to music without DMX. Color macros, master/slave chaining, and a 4-digit LED display round out features typically found in higher-priced fixtures.

Light Output and Beam Characteristics for Wash Coverage

Evaluating moving head washes begins with how much usable light they throw and how tightly that light can be focused. With a 25° beam angle, the HeadBanger 10 produces a narrow, intense wash reaching across a room, while 6100-lux output at one metre ensures the beam stays visible even in rooms with strong ambient light.

• Illuminance: 6100 lux at 1 m — bright enough to cut through haze and ambient stage wash
• Use the 25° beam angle for focused wall and ceiling sweeps or wide enough area coverage, depending on your rig.
• LED Configuration: 7 × 10 W RGBW 4-in-1 — independent white channel for pastels and warm tones beyond standard RGB mixing

Pan, Tilt, and DMX Control for Dynamic Movement

Smooth, wide-range movement is what transforms a static light into a dynamic visual element. With 540° of pan and 270° of tilt — both with fine-channel adjustment — a single HeadBanger 10 can cover virtually every angle in a standard DJ booth or stage setup without repositioning the fixture.

• Pan Range: 540° with fine control — full room sweep from a single truss or stand mount
• Floor-to-ceiling coverage becomes possible with the 270° tilt, avoiding dead zones in your lighting plot.
• DMX Protocol: DMX-512, 9 or 14 channels — flexible channel modes for simple or detailed programming

Power Efficiency, Cooling, and Physical Build

Mobile DJs and venue installers need fixtures that run cool, stay quiet, and sip power. The HeadBanger 10 draws just 80 watts total — LEDs plus electronics combined — and uses a Delta Electronics low-noise cooling fan that keeps operating temperatures in check without drowning out nearby microphones or acoustic instruments.

• Power Consumption: 80 W — a fraction of legacy discharge-lamp moving heads
• The cooling system features a Delta Electronics low-noise fan, making it quiet enough for intimate venues and speech events.
• Housing: Metal — durable enough for regular transport and rigging
• Weight: 2.75 kg — light enough for single-point truss clamping without overloading standard lighting bars
• Dimensions: 270 × 260 × 230 mm — compact footprint for tight rigging positions

DJs, Mobile Entertainers, and Small-Venue Installers

This model is the right choice for mobile DJs and event lighting operators needing a lightweight, high-output wash moving head that delivers strong color coverage without excessive power draw. Wedding DJs running a pair of these on a lighting bar get full-room color sweeps from minimal gear. Small-venue installers benefit from the metal housing, 3-pin XLR connectivity, and master/slave chaining for synchronized multi-fixture setups. The sound-active mode with adjustable microphone sensitivity also makes it a solid standalone option for operators who prefer automatic operation over DMX programming. Indoor-rated and designed for regular transport between gigs, it has earned a reputation among working DJs as reliable over years of continuous use.

Stagg HeadBanger Series — Built for Working DJs

Stagg, distributed from Brussels by EMD Music, has built its lighting catalogue around the practical needs of mobile entertainers rather than theatrical spec sheets. The YRS-23 (reference SLI MHW HB10-0) sits at the heart of that philosophy: a fixture that working DJs have reported using at every gig for over a year without a single failure, producing ample color including ultraviolet tones for blacklight effects. The series continues to be one of the most popular entry-level moving heads in the European DJ market, valued for its balance of output, features, and affordability.