RockBoard RBO CAB F TMXA 60 BK 60 cm MIDI kabelis
The RockBoard Flat Mini-TRS to FlaX Midi Type A 60 cm cable is a compact MIDI adapter engineered for pedalboards running modern MIDI-equipped effects. It pairs a lockable omni-directional DIN 5-pin MIDI plug with a flat angled 3.5 mm stereo TRS jack, following the standard Type A pinout. The flat rectangular cable profile keeps wiring tidy and prevents cable jams under the board.
- Length: 60 cm — enough reach for medium pedalboard layouts without excess slack.
- Connectors: DIN 5-pin MIDI male to 3.5 mm TRS stereo male, straight-to-angled orientation.
- Type A wiring: standard MIDI TRS mapping compatible with Boss, Empress, Korg, Akai, MOD, Make Noise and many more.
- FlaX MIDI plug: omni-directional, lockable via 1.5 mm hex key (not included) for a secure, vibration-free fit.
MIDI Cable for Compact Pedalboard Setups
The RockBoard Flat Mini-TRS to FlaX Midi Type A 60 cm cable is a purpose-built MIDI adapter for guitar and bass players running MIDI-equipped pedals on a pedalboard. It bridges a standard 5-pin DIN MIDI output to a 3.5 mm TRS MIDI input, following the Type A wiring standard used by Boss, Empress, Korg, Akai, MOD, Make Noise and many other manufacturers. The cable keeps the MIDI signal path short, tidy, and mechanically protected — exactly what compact rigs need.
What Sets This MIDI Cable Apart
The standout feature is the FlaX MIDI plug on the DIN end: a compact, omni-directional connector whose orientation can be rotated to almost any angle and then locked in place using a 1.5 mm hex key (not included). On the TRS end, the flat angled 3.5 mm stereo jack keeps the cable flush against the pedal enclosure instead of protruding into adjacent switches.
Connector Specifications
The two ends of this adapter are designed to disappear into a pedalboard rather than stick out of it. The MIDI side uses a compact omni-directional 5-pin DIN plug, while the TRS side uses a flat angled 3.5 mm stereo mini jack.
- Connector A: DIN 5-pin MIDI male, omni-directional and lockable — adjustable orientation prevents strain on the pedal's MIDI jack.
- Connector B: 3.5 mm TRS stereo mini jack male, flat angled — keeps the cable flush against the pedal enclosure.
- Connector Angle: Straight-to-angled — MIDI plug exits straight, TRS plug exits at a low angle.
Wiring Standard and Compatibility
The cable follows the TRS-MIDI Type A specification, the most widely used TRS MIDI pinout. Knowing the pinout matters because Type A and Type B are not interchangeable — connecting the wrong cable to the wrong device will produce no MIDI communication.
- Classification: TRS-MIDI Type A (MIDI standard) — the most widely used TRS MIDI pinout.
- Pin Assignment: MIDI 5 (Sink) → TRS Tip, MIDI 4 (Source) → TRS Ring, MIDI 2 (Shield) → TRS Sleeve, MIDI 1 & 3 → not connected.
- Compatible Devices: Boss, Empress, Korg, Akai, MOD, Make Noise and many more — any pedal or controller using Type A TRS MIDI.
Cable Construction and Length
The flat rectangular conductor profile is the defining physical trait of the RockBoard Flat cable family. Unlike a round cable that wants to coil and lift off the board, this conductor lies flat, reducing mechanical stress on the solder joints inside the plugs.
- Length: 60 cm / 23 5/8" — suited to medium pedalboard layouts where pedals sit a few centimetres apart.
- Cable Profile: Flat rectangular — prevents cable breakage and cable jams under the board.
- Colour: Black — matches most pedalboard finishes and disappears visually under stage lighting.
Krāsa
Mikrofona ieeja
Nē
A tipa savienotājs
B tipa savienotājs
Savienotāja leņķis
Iepakojuma saturs
MIDI Cable
Garums
60 cm
Izcelsmes valsts
Ķīna
Dokumenti
Ražotāja informācija
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
