Izvēlies valsti sūtījuma piegādei

RockBoard RBO POW ACE NOI C 23

Produkta kods: 1338186

RockBoard RBO POW ACE NOI C 23

Produkta kods: 1338186

The RockBoard Noise Cleaner is an IEC adapter cable that filters ground-loop hum at the power supply input of amplifiers, effects pedals, and studio gear. Unlike a ground lift, it keeps the protective earth connection intact while removing low-frequency noise riding on the ground conductor. Plug-and-play via standard IEC connectors, with a blue LED…

RockBoard RBO POW ACE NOI C 23

The RockBoard Noise Cleaner is an IEC adapter cable that filters ground-loop hum at the power supply input of amplifiers, effects pedals, and studio gear. Unlike a ground lift, it keeps the protective earth connection intact while removing low-frequency noise riding on the ground conductor. Plug-and-play via standard IEC connectors, with a blue LED indicator and rugged design suited to live and studio use.

  • Eliminates ground-loop hum and noise directly at the power supply input
  • Maintains proper PE (Protection Earth) connection — not a ground lift
  • Standard IEC connectors for plug-and-play installation between cable and device
  • Blue LED power-on indicator and rugged design for live and studio use
Papildu apraksts tavā valodā vēl nav pieejams. Apraksts angļu valodā varētu palīdzēt.

Ground-Loop Hum Eliminator for IEC-Powered Audio Gear

The RockBoard Noise Cleaner (POWER ACE NOI C) is an in-line IEC adapter cable that eliminates ground-loop-based mains hum at the power supply input. It plugs between any standard IEC power cable and the IEC inlet of an amplifier or effects unit, filtering low-frequency voltage and current on the protective earth conductor that cause 50/60 Hz hum when devices share a mains ground. Unlike a ground lift, it keeps the protective earth connection intact.

Standout Engineering

Rather than breaking the safety ground, this unit cleans the protective earth conductor while keeping it connected. It has proven especially effective at dramatically reducing hum with vintage-style tube amps, and a blue LED confirms power is flowing and the filter is active.

Electrical Ratings

Rated for the European mains standard, the Noise Cleaner drops directly into 220 – 240 V studio and stage setups.

  • Type: Noise Reducer / IEC adapter cable
  • Input Voltage: 220 – 240 V / 50 – 60 Hz
  • Maximum Current: 6 A
  • Safety: Maintains proper PE (Protection Earth) connection — not a ground lift

Physical Build and Connectors

The slim housing tucks behind any amp or pedalboard power supply.

  • Connectors: Standard IEC male/female — plug-and-play between cable and device
  • Dimensions: 470 x 50 x 20 mm
  • Weight: 160 g
  • Indicator: Blue LED power-on light

Compatibility

Works with any IEC-powered audio device suffering from ground-loop hum — amplifiers, multi-effects units, isolated pedalboard power supplies, and live installations. Most useful in venues with questionable mains wiring, home studios where multiple devices share a ring main, and rigs combining a vintage-style tube amp with digital processors.

  • Compatible With: Any device with a standard IEC C14 power inlet
  • Best For: Ground-loop hum from shared mains grounds — not for pickup hum or high-gain noise floor

Suitability
Country

Izcelsmes valsts

Ķīna

Dokumenti

Lietošanas instrukcija
Ražotāja informācija
Ražotājs:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Vācija
Atbildīgā persona:
Warwick GmbH & Co Music Equipment KG
Drošības instrukcijas

Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.