RockBoard RBO B QM T L6 Montāžas komplekts
The RockBoard QuickMount Type L6 is a dedicated pedal mounting plate engineered for the LINE6 HX Stomp, designed to replace messy hook-and-loop tape with a clean, screw-on solution that locks into the RockBoard Slot Grid. Built from carbon-reinforced composite plastic, the plate measures 170 x 123 mm and ships with replacement mounting screws so installation requires no permanent modification to the pedal itself.
- Pedal compatibility: LINE6 HX Stomp — purpose-drilled mounting pattern matches the original screw holes for a factory-fit attachment.
- Board compatibility: RockBoard Slot Grid — the plate snaps into the board's routed slots for instant, residue-free mounting and removal.
- Material: carbon-reinforced composite plastic — rigid enough to support the HX Stomp without flex, light enough to keep the board's overall weight down.
- Package contents: mounting plate + replacement screws — everything needed to retrofit the pedal in a few minutes.
RockBoard QuickMount Type L6 — Clean Mounting for the LINE6 HX Stomp
The RockBoard QuickMount Type L6 is a pedal mounting plate purpose-built for the LINE6 HX Stomp, giving players a residue-free alternative to Velcro on a RockBoard pedalboard. The plate screws onto the back of the HX Stomp using the pedal's original mounting points, then snaps directly into the routed Slot Grid of any compatible RockBoard so the unit can be clicked in and out in seconds. Because the plate mounts on top of the existing pedal back plate, no drilling, soldering or permanent modification is required — the HX Stomp can be returned to its factory state at any time.
What Sets the QuickMount System Apart
Unlike generic adhesive solutions, the QuickMount Type L6 uses RockBoard's slot-and-tab interface, which holds the pedal mechanically rather than chemically. The plate is moulded from carbon-reinforced composite plastic, giving it the rigidity needed to support the HX Stomp's chassis without bending under foot pressure, while staying light enough not to noticeably alter the board's balance.
Physical Dimensions and Footprint
The plate's footprint is matched to the LINE6 HX Stomp's base, so the pedal sits flush inside the RockBoard Slot Grid without overhang. Compact dimensions also leave adjacent slot positions free for additional pedals or accessories.
- Width: 170 mm — matches the HX Stomp chassis for a flush fit inside the Slot Grid.
- Depth: 123 mm — keeps the pedal aligned with neighbouring units and preserves routing channels.
- Surface: flat, universally usable — no raised features that interfere with the pedal's rubber feet or input jacks.
Material and Construction
Carbon-reinforced composite plastic was chosen for its strength-to-weight ratio, resisting the shear forces generated when a player stomps the HX Stomp during a performance. The material does not warp under repeated temperature changes on stage or in transit.
- Material: carbon-reinforced composite plastic — rigid support without adding meaningful weight to the pedalboard.
Installation and Package Contents
Installation takes only a few minutes: the original back-plate screws are removed, the QuickMount plate is aligned with the HX Stomp's screw holes, and the included replacement screws secure both layers together. The pedal is then ready to click into the RockBoard Slot Grid.
- Package contents: QuickMount plate + replacement mounting screws — no additional hardware or adhesive required.
- Mounting method: screw-on to pedal, snap-in to RockBoard Slot Grid — reversible installation leaves no residue on the pedal or board.
- Article number: RBO B QM T L6 — for reordering or matching with other RockBoard QuickMount plates.
Tips
Materiāls
Iepakojuma saturs
Platums (mm)
170
Dziļums (mm)
123
Izcelsmes valsts
Ķīna
Dokumenti
Lietošanas instrukcija
Ražotāja informācija
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
