Turbosound iQ12 Aktīvais skaļrunis
The Turbosound iQ12 is a 2,500-watt powered two-way loudspeaker designed for both portable PA and installed sound. Its 305 mm low-frequency driver, paired with a 25 mm compression driver, produces a full-range output spanning 45 Hz to 20 kHz. Klark Teknik DSP manages dynamic EQ, transparent limiting, and speaker modelling presets for tailored performance.
- Klark Teknik Class-D amplification delivers 2,500 watts of output while keeping transport weight at 10.5 kg
- For stand, floor, wall, or ceiling placement, you can adjust frequency response via Spatial Contour Control
- ULTRANET networking transmits 16 channels of digital audio over one CAT5 cable
- A two-channel mixer with combo inputs and mic/line switching offers flexible connectivity
2,500-Watt Powered Loudspeaker with Klark Teknik DSP
Active loudspeakers in this class need to balance raw output with intelligent signal processing, and the Turbosound iQ12 addresses both demands in a single enclosure. This powered two-way system pairs a 305 mm woofer with a 25 mm compression driver, driven by 2,500 watts of Klark Teknik Class-D amplification. Onboard DSP handles dynamic EQ, speaker modelling, and feedback elimination. Placement flexibility is a key asset: whether pole-mounted for mobile gigs or ceiling-mounted for permanent installs, the iQ12 adapts its tonal character through dedicated presets.
Klark Teknik DSP Engine with Speaker Modelling and Spatial Contour Control
What sets this loudspeaker apart is the depth of its digital processing. Klark Teknik's Spatial Contour Control (SCC) compensates for boundary loading when the enclosure sits on the floor, mounts to a wall, or hangs from a ceiling—similar to boundary compensation on studio monitors. Speaker modelling presets emulate the tonal character of respected industry loudspeakers, while Feedback Interception minimizes ringing in untreated rooms.
Driver Configuration, Connectivity, and Enclosure Build
Key specifications for planning and system integration:
- Power Output: 2,500 W — Klark Teknik Class-D two-channel amplification delivers high SPL with low weight
- Combining a 305 mm LF driver with a lightweight voice coil and a 25 mm HF compression driver using a copper-clad aluminium voice coil means both punch and clarity are available in one enclosure.
- Frequency Range: 45 Hz – 20 kHz — covers the full audible spectrum for both music and speech reinforcement
- Inputs: 2× Combo (XLR/jack) with mic/line switch, ULTRANET via RJ45, and USB-B for PC control and firmware updates
- Enclosure: Fibreglass-reinforced composite with powder-coated steel grille, dual-angle pole mount, and rigging points — 10.5 kg
For Mobile PA Operators and Installation Engineers
Single-person load-in is straightforward thanks to the 10.5 kg weight. Installation technicians benefit from rigging points and SCC presets, which allow compensation for wall and ceiling mounting without external EQ. Houses of worship, conference rooms, and small venues that require one loudspeaker for both speech and music can use the two-channel mixer with mic/line switching to eliminate the need for a separate front-end.
Tips
Stiprinājums uz statīva
Jā
DSP
Vadības elementi
Daudzfunkciju poga, Līmenis (2 x)
LAN
Jā (2)
Bluetooth
Nē
Jauda (Watt)
Jauda
Frekvenču diapazons
Zemo frekvenču skaļrunis
Augsto frekvenču skaļrunis
Displejs
Jā
Krāsa
Melna
Skaļruņa korpusa materiāls
Plastmasa
USB
Jā
Izejas
XLR (3 x), AC (2 x)
Atmiņas kartes slots
Nē
AUX IN
Nē
Mikrofona ieeja
Jā (2)
Skaņas spiediena līmenis - SPL (dB)
Iepakojuma saturs
Lietošanas instrukcija
Skaits iepakojumā (gab.)
1
Darbība ar baterijām
Nē
Barošana
powerCON
Augstums (cm)
60,9
Platums (cm)
37
Dziļums (cm)
37
Neto svars (kg)
14,7
Izcelsmes valsts
Ķīna
Dokumenti
Lietošanas instrukcija
Ražotāja informācija
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
