Izvēlies valsti sūtījuma piegādei

Revoltage RVSW-118A Aktīvs zemfrekvences skaļrunis

4,5/5

Produkta kods: 845883

Revoltage RVSW-118A Aktīvs zemfrekvences skaļrunis
4,5/5

Produkta kods: 845883

Pārbaudi arī mūsu izdevīgās alternatīvas. Tās tevi varētu interesēt:
The Revoltage RVSW-118A is a professional 18" active subwoofer built to deliver deep, punchy, and precise bass for live sound, touring rigs, and fixed installations. A 2000 W Class-D amplifier drives a custom 18" woofer with a 4.0" voice coil, reaching 132 dB SPL across a 30 Hz to 140 Hz range. Selectable crossover points, balanced XLR I/O, and a…

Revoltage RVSW-118A Aktīvs zemfrekvences skaļrunis

Kā jauns
Produkts, kas nekad nav bijuši izstādīts un izmantots. Produkts ir 100% stāvoklī, bet iepakojumā var būt nelielas vizuālas nepilnības saistībā ar manipulācijām uzglabāšanas vai transportēšanas laikā. Piemērots tiem, kuri meklē kvalitatīvu produktu par izdevīgu cenu, bez kompromisiem funkcionalitātē vai veiktspējā. Produktam ir pilna likumā noteiktā garantija.

The Revoltage RVSW-118A is a professional 18" active subwoofer built to deliver deep, punchy, and precise bass for live sound, touring rigs, and fixed installations. A 2000 W Class-D amplifier drives a custom 18" woofer with a 4.0" voice coil, reaching 132 dB SPL across a 30 Hz to 140 Hz range. Selectable crossover points, balanced XLR I/O, and a 35 mm pole-mount socket make integration with full-range tops straightforward.

  • 18" woofer with 4.0" voice coil for clean, high-output low end
  • Built-in 2000 W Class-D amplifier — no external rack amp required
  • Frequency response of 30 Hz to 140 Hz covers true sub-bass territory
  • Plywood cabinet with Polyurea coating and iron mesh grille for touring durability
Papildu apraksts tavā valodā vēl nav pieejams. Apraksts angļu valodā varētu palīdzēt.

Revoltage RVSW-118A — 18" Active Subwoofer for Live Sound

The Revoltage RVSW-118A is a professional 18" active subwoofer engineered to deliver deep, punchy, and precise bass that fills any venue. Built for demanding live events, touring rigs, and fixed installations, this model combines high output, tight low-end control, and durable construction in a single integrated cabinet. At its core sits a custom 18" woofer with a 4.0" voice coil, paired with a 2000 W Class-D amplifier that drives clean, powerful performance without weighing down the rig. The RVSW-118A is the right choice for sound engineers and performers who need reliable low-frequency extension that holds up under continuous touring conditions.

What Sets This Subwoofer Apart

What makes this subwoofer stand out is the combination of a 4.0" voice coil inside the 18" driver and a Polyurea-coated plywood cabinet — a build spec normally reserved for higher-tier touring cabinets. The active cooling system keeps the Class-D amp stage thermally stable during long sets, while the iron mesh grille protects the cone from impact damage on the road. Three selectable crossover points (80 Hz, 100 Hz, 120 Hz) make it easy to dial the sub into any full-range top without external processing.

Driver Performance and Acoustic Output

The acoustic heart of the unit is its 18" woofer, sized to move serious air at the lowest octaves where most PA systems fall short. A 4.0" voice coil handles thermal load during sustained high-output passages, keeping distortion low even at peak SPL.

  • Woofer Size: 18" — large-format driver for deep, room-filling low end
  • Voice Coil: 4.0" — handles sustained high-power passages with low thermal compression
  • Max SPL: 132 dB — enough headroom for medium-sized halls and outdoor stages

Amplification and Frequency Response

The built-in Class-D amplifier delivers 2000 W of clean power, removing the need for an external rack amp and simplifying signal flow. Frequency response spans 30 Hz to 140 Hz, covering the sub-bass and low-bass regions where kick drums, bass guitars, and electronic music live.

  • Amplifier Type: Class-D, 2000 W — efficient power stage with low heat output
  • Frequency Range: 30 Hz - 140 Hz — extends well below audible music fundamentals for true sub-bass impact
  • Crossover Points: 80 Hz / 100 Hz / 120 Hz — selectable to match different full-range tops

Connectivity, Cabinet, and Build

Professional XLR inputs and outputs on the rear panel allow the unit to chain into a standard PA signal chain without adapters. The 35 mm pole-mount socket accepts standard distance rods for satellite-top configurations, while the plywood cabinet with Polyurea coating is built to survive repeated truck-loading.

  • Inputs / Outputs: XLR in, XLR out — balanced professional connections for clean signal transfer
  • Pole Mount: 35 mm socket — accepts standard distance rods for top-cabinet mounting
  • Cabinet: Plywood with Polyurea coating and iron mesh grille — touring-grade durability at 39 kg

Suitability

Tips

Subwoofer

Features

DSP

Jā

Bluetooth

Nē

Skaļruņi

1x 18''

Stiprinājums uz statīva

35 mm

Properties

Zemo frekvenču skaļrunis

18"

Frekvenču diapazons

30 Hz - 140 Hz

Jauda (Watt)

2000

Jauda

2000 W

Displejs

Nē

Dalījuma frekvence

100 Hz, 120 Hz, 80 Hz

Krāsa

Melna

Material

Skaļruņa korpusa materiāls

Saplākšņa korpuss

Inputs and Outputs

USB

Nē

Ieejas

XLR

Izejas

XLR

AUX IN

Nē

Acoustics

Skaņas spiediena līmenis (SPL)

132 dB

Power supply

Barošana

230 V

Accessory

Stiprinājums

Statīva ligzda 35 mm

Dimensions and Weight

Neto svars (kg)

39

Platums (cm)

52

Augstums (cm)

60,1

Dziļums (cm)

69,4

Svars

39 kg

Country

Izcelsmes valsts

Ķīna

Pamatojoties uz atsauksmju skaitu: 4

Klientu atsauksmes par produktu

Visas atsauksmes ir no pārbaudītiem klientiem, kuri pie mums iepriekš ir iegādājušies produktu.

Dokumenti

Lietošanas instrukcija
Ražotāja informācija
Ražotājs:
Muziker a.s
Drieňova 1H, 82101, Bratislava, Slovākija
Atbildīgā persona:
Muziker a.s
Drieňova 1H, 82101, Bratislava, Slovākija
Drošības instrukcijas

Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.