Albānija
Amerikas Savienotās Valstis
Argentīna
Austrija
Austrālija
Beļģija
Bosnija un Hercegovina
Brazīlija
Bulgārija
Dienvidāfrika
Dānija
Filipīnas
France
Grieķija
Horvātija
Igaunija
Itālija
Jaunzēlande
Kanāda
Kolumbija
Latvija
Lielbritānija
Lietuva
Luksemburga
Meksika
Melnkalne
Moldova
Norvēģija
Nīderlande
Polija
Portugāle
Rumānija
Serbija
Slovākija
Slovēnija
Somija
Spānija
Turcija
Ukraina
Ungārija
Vācija
Ziemeļmaķedonija
Zviedrija
Čehija
Čīle
Īrija
Šveice
Turbosound TFX122M-AN
The Turbosound TFX122M-AN is a 1,100 W active 12" coaxial stage monitor built for touring musicians, worship teams, and live venues. Klark Teknik Class-D amplification drives a custom 12" woofer and 1" titanium-dome compression driver through a 60° × 40° waveguide for consistent coverage across the stage. Onboard DSP, ULTRANET digital audio networking, and a low-profile plywood cabinet make this wedge a flexible, road-ready monitoring solution.
- Coaxial 12" LF / 1" HF driver arrangement projects sound from a single point so every performer hears the same mix.
- Klark Teknik Class-D amp delivers 1,100 W of headroom while keeping the cabinet light enough for daily load-ins.
- Built-in DSP with dynamic EQ, multiband limiting, and position-compensation presets lets FOH engineers tune the wedge quickly.
- ULTRANET RJ45 ports carry 16 channels of 24-bit digital audio over a single Cat 5 cable for tidy stage runs.
Coaxial 12" Active Stage Monitor with Touring-Grade Headroom
The Turbosound TFX122M-AN is a 1,100 W powered 12" two-way floor monitor built for portable speech and music reinforcement. A custom high-excursion 12" low-frequency driver pairs with a 1" titanium-dome compression driver on a low-distortion waveguide, delivering 75 Hz to 18 kHz (±3 dB) and 125 dB peak SPL. Designed to operate without an external controller, the wedge drops straight into touring, club, and theater rigs.
Coaxial Driver Geometry and Klark Teknik DSP
What sets this monitor apart is its coaxial driver geometry: the 1" high-frequency driver sits at the centre of the 12" woofer, so highs and lows radiate from one acoustic point. That layout keeps off-axis response consistent as performers move across the wedge. A Klark Teknik DSP engine adds dynamic EQ, multiband limiting, and position-compensation presets for floor or stand placement.
Power, Drivers, and Connectivity — What the Specs Mean Onstage
Every spec on this wedge is aimed at fast setup and a stable, full-range monitor mix. The Class-D amplifier pushes 1,100 W from a 15 mm plywood cabinet weighing 16.9 kg.
- Output Power: 1,100 W peak — headroom for full-band stage volume
- Drivers: 12" high-excursion LF + 1" titanium-dome HF compression driver — coaxial point-source imaging keeps the mix consistent off-axis
- Frequency Response: 75 Hz to 18 kHz (±3 dB) — full-range vocal and instrument monitoring
- Coverage: 60° H × 40° V rotatable waveguide — aim the wedge at the performer instead of the audience
- Networking: 2x RJ45 ULTRANET, 16 channels / 24-bit over Cat 5 — single-cable digital audio runs replace bulky multicores
Built for Touring Bands, Worship Teams, and Mobile PA Rigs
The Turbosound TFX122M-AN is the right choice for live performers and engineers who need a road-ready wedge with high SPL, consistent coverage, and digital networking. Touring bands benefit from the coaxial driver's uniform off-axis response, keeping vocalists hearing the same mix from any position. Worship teams and AV crews gain fast setup through ULTRANET digital audio runs and DSP presets that compensate for floor or stand placement. Mobile DJs and venue operators get a 1,100 W Class-D wedge that pairs cleanly with active subwoofers via the XLR Thru output.
Tips
Speakers
USB
Power RMS
Power Supply
240V
UK/EU Power supply included
No
Made in
China
Dokumenti
Lietošanas instrukcija
Ražotāja informācija
Drošības instrukcijas
Lūdzu, skati šī produkta īpašos drošības norādījumus lietotāja rokasgrāmatā.
